Integrated cooker hood

Extraction hood

Recirculation mode possible with optional conversion kit and active charcoal filter

For installation in a wall unit which is at least 60 cm wide and 46 cm high

Pull-out deflector plate, 90 cm wide

The front edge can be concealed by an aluminium or white lightshield(optional accessory) or by a lightshield to match the kitchen furniture(fitting kit required)

Touch controls with LED lights for ON/OFF, hob lighting and power regulation

Three fan settings plus an Intensive setting

Memory function for fan, lighting and power level (in event of power outage)

Pulling the deflector plate out and pushing it in switches the cooker hood on and off automatically

The intensive setting can be programmed to switch off automatically

after 10 minutes.

Electronic power regulation

Double acting radial fan

Two removable, dishwasher-safe stainless steel grease filters

Non-return flap

Ducting outlet through top of cooker hood

Recommended ducting diameter: 150 mm

Halogen lighting, 2 x 20 Watt

Extraction 150 mm Ø according to EN 61591

Intensive setting 550 m³/h, 64 dB(A) re 1 pW (52 dB(A) re 20 µPa air throughput)

Maximum setting 400 m³/h, 56 dB(A) re 1 pW (44 dB(A) re 20 µPa air throughput)

Extraction 125 mm Ø according to EN 61591

Intensive setting 520 m³/h, 65 dB(A) re 1 pW (53 dB(A) re 20 µPa air throughput)

Maximum setting 380 m³/h, 57 dB(A) re 1 pW (45 dB(A) re 20 µPa air throughput)

Recirculation 150 mm Ø according to EN 61591

Intensive setting 350 m³/h, 72 dB(A) re 1 pW (60 dB(A) re 20 µPa air throughput)

Maximum setting 280 m³/h, 67 dB(A) re 1 pW (54 dB(A) re 20 µ Pa air throughput)

Safety switch off after 10 hours

Reducing stub for 125 mm Ø

Active charcoal filter DKF 13-1

Recirculation conversion kit DUU 150

Lightshield (aluminium or white)

Fitting kit for lightshield DML 300

Wall pipe MR 100-150

Flexible ducting DAS 100-150

Condensate trap DKS 125/150