Island cooker hood, extraction mode. Recirculation mode possible with

conversion kit and active charcoal filters.

90 cm wide

Matt brushed stainless steel housing and tower

Island cooker hood for installation on the ceiling

Matt brushed stainless steel canopy and tower

Touch controls with LED indicators for ON/OFF, hob illumination and fan settings

Operating hours counter for grease and charcoal filters (individually

programmable), Run-on time (5/15 min)..

Three fan settings plus Intensive

The Intensive setting can be programmed to switch down to fan setting 3 after 10 minutes

Two touch controls for motorised hood height regulation

Suitable for Con@ctivity

Electronic power regulation

Non-return flap

Three removable, dishwasher-safe stainless steel grease filters

Ducting outlet through top of cooker hood

Exhaust ducting 150 mm Ø

Halogen lighting, 4 x 20 Watt, dimmable

Double-sided radial fan

Sound insulation inside cooker hood

Floating chimney bracket to assist with installation

Extraction 150 mm Ø according to EN 61591

Intensive setting 700 m³/h, 67 dB(A) re 1 pW (54 dB(A) re 20 µPa air throughput)

Maximum setting 480 m³/h, 59 dB(A) re 1 pW (46 dB(A) re 20 µPa air throughput)

Recirculation 150 mm Ø according to EN 61591

Intensive setting 500 m³/h, 71 dB(A) re 1 pW (58 dB(A) re 20 µPa air throughput)

Maximum setting 400 m³/h, 65 dB(A) re 1 pW (52 dB(A) re 20 µ Pa air throughput)

Safety switch-off

Active charcoal filter DKF 12-1

Recirculation conversion kit DUI 31

Wall vent with 100 / 110 / 125 / 150 mm diameter.

Flexible ducting DAS 100-150

Roof fitting kit DDF 125/150

Condensate trap DKS 150/DKS 125

Control module DSM 400

Silencer DASD 150

Communication module XKM 2000 DA for Con@ctivity

Production specials possible