Wall mounted cooker hood for extraction mode only

90 cm wide

Glass-stainless steel combination with 1 pane of safety glass

Matt brushed stainless cooker hood body

Wall canopy for integration into wall to rear of hob unit

On-glass light-touch switches with LEDs for On/Off, hob lighting, indirect lighting and power settings, opening and closing of canopy and glass screens, operating hour counter for grease filter (programmable), fan run-on (5/15 mins.), programmable Intensive switch-back after 10 mins., three power settings plus Intensive

Electronic suction power regulation

Two removable, dishwasher-safe stainless steel grease filters

Non-return flap

Ducting diameter 150/125 mm

Recommended ducting diameter: 150 mm

Vent connection to top, side or rear

Halogen lighting, 4 x 20 Watt, dimmable

Indirect LED lighting in lower glass panel

Double-sided radial fan

Safety switch-off

Vented operation 125 mm Ø in accordance with EN 61591

Intensive: 660 m³/h, 73 dB(A) re 1 pW ( dB(A) re 20 µPa acoustic pressure)

Maximum: 570 m³/h, 66 dB(A) re 1 pW ( dB(A) re 20 µPa acoustic pressure)

Vented operation 150 mm Ø in accordance with EN 61591

Intensive: 850 m³/h, 72 dB(A) re 1 pW ( dB(A) re 20 µPa acoustic pressure)

Maximum: 650 m³/h, 65 dB(A) re 1 pW ( dB(A) re 20 µPa acoustic pressure)

Reducing stub for 125 mm Ø

DER 6000 building-in frame needed

Control module DSM 400

DAFK 100 window contact switch

Communication module XKM 2000 DA for Con@ctivity

Silencer DASD 150

Wall pipe MR 100-150

Roof fitting kit DDF 125/150

Flexible ducting DAS 100-150

Flat channel ducting system

Requires installation of DER 6000 built-in frame prior to installation of DA 6000 W decor hood. The DA 6000 W must not be installed in combination with a gas cooktop.