Welcome to Miele Singapore

Frequently Asked Questions
Tumble dryer

With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. The following guide lists minor problems and possible causes and provides notes on remedy. If you cannot find an appropriate solution for your problem, please contact our Service Department.

PLEASE NOTE: Repair work to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

The programme does not start

Check that the mains plug is correctly inserted and that the fuse has not tripped. Check that the door is closed properly and that the correct programme has been selected and started. A number of Miele tumble dryers have a system lock as a child-safety feature and to prevent unauthorised use in shared laundry rooms. Check whether this lock is activated. Information on activation and deactivation is given in the operating instructions.

"Empty out container" indicator comes on

The condensed water container needs emptying. Switch off the tumble dryer, empty, then replace the container. Ensure that it clicks firmly into position. If a condensate drain hose has been fitted, check this for kinks or blockages.

The dryer runs for an exceptionally long time and/or the "Clean airways" indicator comes on

Clean the fluff filters in the door frame. The heat exchanger should also be cleaned. The cleaning process is described in the operating instructions.

The drum door opens during the drying cycle

Check that airways are not blocked and clean the affected part according to the operating instructions.

The following LEDs flash: Machine iron, Hand iron, Normal

Switch the dryer off and then back on again. If the fault message reappears, please contact our Customer Service.

Horizontal bars move across the display

This does not indicate a fault but residual moisture sensing at the beginning of a programme.

back




		Floor Care Dishwashers Coffee Machines CombiSets Steam Ovens Hoods Warming Drawers Ovens Hobs Microwaves Cooking & Baking Freezers Fridges Fridge Freezers Wine Coolers Refrigeration Rotary Irons Tumble Dryer Washing Machines Laundry Care
search in www.miele.sg: only products		Frequently Asked Questions Tumble dryer With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. The following guide lists minor problems and possible causes and provides notes on remedy. If you cannot find an appropriate solution for your problem, please contact our Service Department. PLEASE NOTE: Repair work to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. The programme does not start Check that the mains plug is correctly inserted and that the fuse has not tripped. Check that the door is closed properly and that the correct programme has been selected and started. A number of Miele tumble dryers have a system lock as a child-safety feature and to prevent unauthorised use in shared laundry rooms. Check whether this lock is activated. Information on activation and deactivation is given in the operating instructions. "Empty out container" indicator comes on The condensed water container needs emptying. Switch off the tumble dryer, empty, then replace the container. Ensure that it clicks firmly into position. If a condensate drain hose has been fitted, check this for kinks or blockages. The dryer runs for an exceptionally long time and/or the "Clean airways" indicator comes on Clean the fluff filters in the door frame. The heat exchanger should also be cleaned. The cleaning process is described in the operating instructions. The drum door opens during the drying cycle Check that airways are not blocked and clean the affected part according to the operating instructions. The following LEDs flash: Machine iron, Hand iron, Normal Switch the dryer off and then back on again. If the fault message reappears, please contact our Customer Service. Horizontal bars move across the display This does not indicate a fault but residual moisture sensing at the beginning of a programme. back
		Home Contact Us References Legal Notice Australia Austria Belgium Canada China Chile Croatia Czech Republic Denmak Finland France Germany Great Britain Greece Hong Kong Hungary Ireland Italy Japan Korea Luxembourg Mexico Netherlands Norway Poland Portugal Romania Russia Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Turkey UAE Ukraine USA International